Keep Thermometer in Covered Area — Outside thermometers should be placed in an area that provides it some protection from the elements. Since weather-related events such as wind, snow, hail, and rain can occur frequently, an unprotected thermometer will be unreliable. Placing the thermometer in a specially created covered area can work well too if you do not have any natural overhangs on your house. Outside Thermometers should Never Be Placed at Lower Ground Levels — It is best to place an outdoor thermometer between four to six feet off the ground level.
When these devices are placed too close to ground level, they can easily get exposed to weather elements that will adversely affect the reading. When located at or near the ground, they will be inclined to pick up ground surface heat or cooling, which can improperly affect the accuracy of the reading. They should also not be placed too high above ground because it can pick up radiative cooling, which will also give an improper reading.
Do Not Locate Outside Thermometers Next to Grills — The outside thermometer should never be placed right next to the grilling area as the constant peaks of heat radiating from the grill when operating can prematurely destroy its capability to give proper readings. Place Outside Thermometer in a Location with Adequate Airflow -Sufficient airflow is essential to ensure that the reading is correct.
Areas that are too restricted in airflow can create an inaccurate reflection of the real current outside temperatures.
Do Not Place Your Outdoor Thermometer Next to Asphalt or Concrete Pavement — Since both asphalt and concrete can hold in a significant amount of solar heat, if the thermometer is placed too close to a paved area such as a driveway, the heat rising from the asphalt or concrete during the warmer months will give the thermometer an inaccurate reading.
Do Not Place the Thermometer on the Wall of a House — Thermometers that are attached directly onto an outside wall of a home may be affected by the inside temperature of the home.
Having them a short distance away from the wall of a house is best. Do Not Place Your Outside Thermometer next to Furnace or Dryer Vents or Chimneys — Because heat travels through furnace and dryer vents as well as the chimneys of fireplaces and woodstoves, it is vital not to place a thermometer close to any of these. Location of the thermometer should be at least fifteen feet away from these areas to ensure there is no adverse effect on the reading.
As we mentioned earlier, the thermostat measures the average temperature of your home. And what is another word for average? Middle or centre! So the middle of your home will give you the most accurate average reading since it will measure the centrally circulating air. Heat rises, so if your thermostat is very high up the wall it will give you an inflated reading and tell your boiler to cool the house down. About 5ft above the floor is the most common place to install your thermostat for an accurate average reading.
It is a good idea to avoid placing your thermostat in the following areas as these volatile zones are subject to other heat sources and extreme temperature variations. We would not advise putting the thermostat in the coldest room as this would not be a true reflection of the temperature of the rest of the house. You want an average reading for it to work efficiently so placing it in the coldest part of the house would be an extreme cold air temperature zone to avoid.
If the thermostat senses cold, it will think that your entire home is just as cold. So it will tell your boiler to work harder which could increase your heating costs. Putting the thermostat in a very warm room tells the sensor that the house is too warm and so the boiler turns the heating down when you might not want it to.
Since heat rises, the upstairs rooms will often feel warmer than the downstairs rooms. So an upstairs thermostat might think your entire home is getting too warm and start cooling it down. See Also: Thermostats Locations to Avoid When placing a thermostat, you need to avoid locating it near things that can cause falsely high or low readings—in other words, away from localized hot spots or cold spots.
Your thermostat will be measuring the temperature of the outside air sneaking in. Instead of the overall indoor air temperature. Your thermostat will be affected by the fluctuation in temperature every time an exterior door is opened. This can cause your HVAC system to cut on and off unnecessarily. If the sun is shining right on your thermostat, you could end up with a massive energy bill in the summertime. The radiant temperature of that wall will be higher in summer and lower in winter than the air temperature inside your home.
This can lead to your HVAC system running unnecessarily and driving up your bills. Supply vents : Placing a thermostat directly above or below a supply register can really confuse the system. This can cause major fluctuations in the temperature reading of the thermostat, again leading to the HVAC unit frequently turning on and off.
And it will definitely make your home less comfortable! Unfortunately, this is less than ideal. Because hallways are generally long and narrow, they have decreased airflow and circulation.
0コメント